This male threaded brass gas ball valve
uses external threaded connections on both ends with a yellow lever handle
for manual quarter-turn operation.
According to the current product catalog, available sizes are
1/2″, 3/4″ and 1″.
The exact thread standard, pressure rating, working temperature
and detailed testing requirements are not stated in the available
catalog information and should therefore be confirmed before quotation.
Key Features
Brass Gas Ball Valve
Male × Male Threads
Yellow Lever Handle
1/2″–1″ Sizes
Product Specifications
| Parameter | Specification |
|---|---|
| Product Type | Brass Gas Ball Valve |
| Body Material | Brass |
| Connection | Male × Male Threaded Ends |
| Handle | Yellow Lever Handle |
| Operation | Manual Quarter-Turn |
| Available Sizes | 1/2″, 3/4″, 1″ |
| Exact Thread Standard | To Be Confirmed |
| Pressure Rating | To Be Confirmed |
| Working Temperature | To Be Confirmed |
Available Sizes
| Nominal Size | Connection |
|---|---|
| 1/2″ | Male × Male |
| 3/4″ | Male × Male |
| 1″ | Male × Male |
Technical Buyer Notes
Male × Male Threaded Connection
This valve uses an external male threaded connection on both ends.
This distinguishes it from Female × Female and Female × Male gas valve configurations.
Buyers replacing an existing valve should confirm both the nominal size
and the required connection arrangement before ordering.
Buyer Tip:
“1/2 inch gas valve” is not a complete purchasing specification.
Confirm the Male × Male connection,
required thread standard and operating requirements together.
Confirm the Exact Thread Standard
The current catalog confirms Male × Male threaded ends,
but it does not identify the exact pipe-thread standard.
BSPP, BSPT, NPT or another thread standard should therefore
not be assumed until the purchasing requirement is confirmed.
For more information about common pipe threads, see our
BSP vs NPT thread guide
.
Pressure Rating Should Be Confirmed Separately
A pressure rating is not shown for this specific model in the current catalog image.
Buyers should therefore specify the required pressure during quotation
rather than assuming a rating from valve size, handle color or external appearance.
What Should Buyers Specify When Requesting a Quote?
To distinguish this valve from similar gas ball valve models,
provide the complete connection and order requirement.
- Required size: 1/2″, 3/4″ or 1″
- Male × Male connection requirement
- Required thread standard
- Required working pressure
- Working temperature if relevant
- Order quantity
- Reference drawing or sample if available
- Logo, marking or packaging requirements if applicable
OEM & Purchasing Support
SUNRICH FLOW works with specialized manufacturing partners in
Yuhuan, Zhejiang, China, coordinating product specifications,
production, quality control, OEM requirements, packaging and shipment
for international buyers.
For this gas ball valve, customization feasibility should be evaluated
according to the required size, connection, thread, working conditions
and order specification.
OEM Note:
Thread, marking, handle and packaging requirements can be evaluated
according to the final product specification.
Quality & Order Checks
Before bulk production, the confirmed purchasing specification
should be used to check the valve connection and operating requirements.
- Correct nominal size
- Male × Male connection arrangement
- Required thread standard
- Critical connection dimensions
- Handle operation
- Required working pressure
- Required leakage or pressure testing conditions
- Marking and packaging requirements
Quality Note:
No specific pressure rating, shell-test pressure,
seat-test pressure or testing standard is confirmed
in the current catalog information for this model.
These requirements should be agreed before production.
Compare Brass Ball Valve Options
If you are comparing different threaded gas or brass ball valve configurations,
browse our
brass ball valve range
for additional connection and pressure options.
Frequently Asked Questions
What sizes are available?
The current catalog lists 1/2″, 3/4″ and 1″ sizes.
What connection does this gas ball valve use?
This model uses Male × Male threaded ends,
with external threaded connections on both sides.
What thread standard does this valve use?
The exact thread standard is not stated in the current catalog.
It should be confirmed before quotation.
What is the pressure rating?
A pressure rating is not confirmed in the current catalog information
for this specific model.
How is this valve different from a Female × Male gas valve?
This model has external male threaded connections on both ends.
A Female × Male valve instead uses one internal female thread
and one external male thread.
What information should I provide for a quotation?
Please provide the required size, Male × Male connection,
thread standard, working pressure, quantity and any applicable
marking or packaging requirements.
Need a Male Threaded Brass Gas Ball Valve?
Share your required size, thread standard,
pressure requirement and quantity.
We can evaluate a suitable specification for your order.