SUS304 Full Bore Stainless Steel Ball Valve with Male × Female Threads
SUS304 stainless steel full bore ball valve with Male × Female threaded ends and a compact blue butterfly handle. Rated for 1.6 MPa working pressure and -30°C to 120°C operating temperature, with sizes from DN15 to DN50 for compatible water, steam and non-corrosive liquid systems.
The SUS304 full bore stainless steel ball valve
combines a Male × Female threaded connection with a compact
blue butterfly handle for manual quarter-turn shut-off.
The valve uses a full bore flow configuration
and is available in sizes from DN15 to DN50.
The current specification lists a working pressure of
1.6 MPa and a working-temperature range of
-30°C to 120°C.
Water, steam and compatible non-corrosive liquids are listed
as working media. Final suitability should be confirmed according
to the actual medium, thread requirement and operating conditions.
Key Product Features
SUS304 Stainless Steel
The valve material is specified as SUS304 stainless steel.
Full Bore Design
Full bore construction provides a larger internal
flow passage than a reduced-port configuration.
Male × Female Threads
One external male threaded end and one internal
female threaded end.
1.6 MPa Working Pressure
Current technical data lists a working pressure of 1.6 MPa.
-30°C to 120°C
Listed operating-temperature range for compatible applications.
DN15 to DN50
Available in six nominal sizes for different piping requirements.
Technical Specifications
| Product Type | Full Bore Stainless Steel Ball Valve |
|---|---|
| Material | SUS304 Stainless Steel |
| Port Type | Full Bore / Full Port |
| Connection | Male × Female Threaded Ends |
| Operation | Manual Quarter-Turn |
| Handle | Blue Butterfly Handle |
| Working Pressure | 1.6 MPa |
| Working Temperature | -30°C to 120°C |
| Working Media | Water / Steam / Compatible non-corrosive liquids |
| Available Sizes | DN15 / DN20 / DN25 / DN32 / DN40 / DN50 |
| Thread Standard | To be confirmed |
| Ball / Stem Material | To be confirmed |
| Sealing Material | To be confirmed |
Buyer Note:
the current specification does not identify a fixed BSP,
BSPT or NPT thread standard. Thread type and dimensions should
be confirmed before ordering.
Available Sizes
| Nominal Size | Material | Connection |
|---|---|---|
| DN15 | SUS304 | Male × Female |
| DN20 | SUS304 | Male × Female |
| DN25 | SUS304 | Male × Female |
| DN32 | SUS304 | Male × Female |
| DN40 | SUS304 | Male × Female |
| DN50 | SUS304 | Male × Female |
Full Bore Flow Passage
This model is specified as a full bore ball valve.
A full bore design provides a larger internal flow passage
than a reduced-port valve of comparable nominal size,
helping limit unnecessary flow restriction when fully open.
If internal bore diameter or flow performance is critical,
request the actual bore dimensions for the selected size.
Male × Female Connection
One side of the valve uses an external male thread,
while the opposite side uses an internal female thread.
This configuration can simplify installations where adjacent
piping components require different threaded connection types.
Buyers should confirm the exact thread standard and mating
component before production.
Typical Applications
Water Systems
Manual shut-off in compatible water piping systems.
Steam Systems
Steam is listed as a working medium within
the specified temperature range.
Non-Corrosive Liquids
Can be evaluated for compatible non-corrosive
liquid applications.
Equipment Connections
Male × Female configuration for compatible equipment
and threaded piping connections.
What Should Buyers Confirm Before Ordering?
- Required size: DN15, DN20, DN25, DN32, DN40 or DN50
- Male × Female connection requirement
- Required thread standard and dimensions
- Actual working pressure
- Minimum and maximum operating temperature
- Working medium
- Required internal bore diameter, when critical
- Ball and stem material, when specified
- Sealing-material requirements
- Quantity by size
- Product marking requirements
- OEM or private-label packaging requirements
OEM and Project Supply
SUNRICH FLOW works with manufacturing partners to coordinate
product specifications, production requirements, quality follow-up,
marking and packaging for international buyers.
For OEM or replacement projects, drawings, thread information
and reference samples can help confirm the required configuration.
Frequently Asked Questions
What material is this valve made from?
The current specification lists SUS304 stainless steel.
Is this a full bore ball valve?
Yes. The current specification identifies this model
as a full bore ball valve.
What is the working pressure?
The listed working pressure is 1.6 MPa.
What sizes are available?
DN15, DN20, DN25, DN32, DN40 and DN50.
What is the working-temperature range?
The listed range is -30°C to 120°C.
Which thread standard is used?
The current specification does not identify one fixed
thread standard. Confirm the required thread before ordering.
Looking for SUS304 Full Bore Stainless Steel Ball Valves?
Send us the required DN size, thread standard, working medium,
quantity and operating conditions. SUNRICH FLOW can review
the configuration and prepare a quotation for your project.