This Male × Male brass gas ball valve features threaded connections on both ends, a compact 2-piece body, standard-port construction and a yellow T-handle for manual shut-off operation.
The current product specification includes 1/2″ × 3/8″ and 1/2″ × 1/2″ connection configurations, with a pressure rating of 1/2 PSI.
The specified working temperature range is 32°F to 125°F (0°C to 52°C). For a specific gas medium, certification requirement or regulated installation, the complete application conditions should be confirmed before ordering.
1. Key Features
Brass Valve Body
Male × Male Ends
2-Piece Structure
Standard Port
1/2 PSI Rating
Yellow T-Handle
Quarter-Turn Operation
OEM Available
2. Technical Specifications
| Product Type | Brass Gas Ball Valve |
|---|---|
| Body Material | Brass |
| Body Construction | 2-Piece |
| Port Type | Standard Port |
| Connection | Male × Male Threaded Ends |
| Thread Standard | To Be Confirmed |
| Available Configurations | 1/2″ × 3/8″ / 1/2″ × 1/2″ |
| Pressure Rating | 1/2 PSI |
| Working Temperature | 32°F to 125°F / 0°C to 52°C |
| Operation | Manual Quarter-Turn |
| Handle | Yellow T-Handle |
| Internal Component Materials | To Be Confirmed According to Product Specification |
| OEM / Customization | Available According to Project Requirements |
The currently available technical information does not specify the exact thread standard, brass alloy or internal ball, stem and sealing materials. These specifications should be confirmed if required for the project.
3. Male × Male Threaded Connections
This valve uses external male threaded connections on both ends.
The Male × Male configuration allows the valve to connect directly to compatible female-threaded fittings or piping components at both sides.
Two connection combinations are currently listed:
| Connection 1 | Connection 2 |
|---|---|
| 1/2″ | 3/8″ |
| 1/2″ | 1/2″ |
4. What Does 1/2 PSI Mean?
The current factory specification lists this brass gas valve with a pressure rating of 1/2 PSI.
Pressure rating should be evaluated together with the intended gas medium, temperature, connection specification and applicable installation requirements.
5. Standard-Port Ball Valve Design
This model is identified as a standard-port ball valve.
Standard port describes the internal flow-passage configuration and should not be confused with a full-port or full-bore ball valve.
6. Working Temperature
The specified working temperature range is:
32°F to 125°F / 0°C to 52°C
Actual application suitability should also consider the gas medium, working pressure and internal component specification.
7. How Does the Gas Ball Valve Work?
The valve uses a quarter-turn ball-valve mechanism for manual opening and closing.
When the internal ball passage is aligned with the valve body, flow can pass through the valve.
Rotating the yellow handle turns the stem and internal ball through approximately 90 degrees.
When the solid portion of the ball moves across the flow path, the valve isolates the connection.
8. Compact Yellow T-Handle
The compact yellow T-handle provides manual quarter-turn operation without requiring the length of a conventional lever handle.
This configuration can be useful where available operating space around the valve is limited.
The exact handle material is not specified in the currently available factory information and should be confirmed if it is important to the project.
9. Gas Application Considerations
The factory information identifies this product as a brass gas ball valve.
However, the available specification does not identify every compatible gas medium or confirm specific approvals for natural gas, LPG, propane or other regulated gas services.
Before ordering, buyers should confirm:
- Exact gas medium
- Working pressure
- Working temperature
- Male thread standard
- Required connection sizes
- Applicable local regulations
- Required certification or approval
10. Choosing Between 1/2″ × 3/8″ and 1/2″ × 1/2″
The two available configurations use different outlet connection sizes.
1/2″ × 3/8″
Select this configuration when the piping or connected component requires a 1/2″ male connection on one side and a 3/8″ male connection on the other.
1/2″ × 1/2″
Select this version where both sides require the listed 1/2″ male connection size.
11. What Should Buyers Confirm Before Ordering?
- 1/2″ × 3/8″ or 1/2″ × 1/2″ configuration
- Required thread standard
- Gas medium
- Working pressure
- Working temperature
- Required product certification
- Brass material requirements, if specified
- Internal component requirements, if specified
- Logo and product marking
- Packaging requirements
- Order quantity
12. OEM and Custom Gas Valve Options
SUNRICH FLOW supports OEM and customized valve projects for importers, distributors and private-label customers.
Depending on project requirements, product evaluation can include:
- Technical drawings
- Existing physical samples
- Connection dimensions
- Thread requirements
- Material specifications
- Valve body marking
- Handle requirements
- Private-label packaging
If you do not have a technical drawing, an existing valve sample can also be used as the starting point for technical evaluation.
Learn more:
How to Customize Brass Valves Without Technical Drawings
.
13. Integrated Manufacturing & Quality Control
SUNRICH FLOW works with specialized manufacturing partners in Yuhuan, Zhejiang, China, coordinating product specifications, production, quality control, OEM requirements, packaging and shipment for international buyers.
For gas-valve sourcing, the required connection, pressure rating, product marking and other technical requirements are confirmed before production to help maintain consistency throughout the order process.
Specification Control
Production Coordination
Quality Inspection
OEM Coordination
Looking for a Male × Male Brass Gas Valve?
Send us the required connection size, thread standard, gas medium, pressure requirement and quantity.
For replacement or OEM projects, you can also provide a physical sample, drawing or product photos for evaluation.
14. Frequently Asked Questions
What is a Male × Male gas ball valve?
What connection sizes are available?
What is the thread standard?
What is the pressure rating?
What is the working temperature range?
Is this a full-port gas valve?
Is this valve suitable for natural gas or LPG?
Can this gas ball valve be customized?
Need a Brass Gas Ball Valve?
Tell us whether you require 1/2″ × 3/8″ or 1/2″ × 1/2″, together with the thread standard, gas medium, pressure requirement, quantity and OEM requirements.